V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
Remove the ball joint from the control arm. Use: 951 2945 Puller See: Tools and Equipment/951 2945 Puller.
Pull the ball joint out of the wheel spindle. Use: 999 7076 Lever See: Tools and Equipment/999 7076 Lever.
Removing the brake caliper
Remove the 2 screws.
Hang up the caliper in a suitable position to avoid damage to the brake hose.
Removing the drive shaft from the hub
Pull the drive shaft out of the hub. Hang up the drive shaft in an appropriate position. Hang up the wheel spindle on the ball joint. Loosely install the nut.
Use: 999 7076 Lever See: Tools and Equipment/999 7076 Lever.
Removing the anti-roll bar link from the spring strut
