V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
Grind a channel in the inside of the socket so the expander 999 5777 Extractor See: Tools and Equipment/999 5777 Extractor attaches. The socket can
also be heated using a hot air gun or induction heater.
Installing tool
Install expander 5777-1 and connecting rod 5777-2 (these are included: 999 5777 Extractor See: Tools and Equipment/999 5777 Extractor ) for the
puller cylinder.
999 5575 PULLER CYLINDER USED WITH HYDRAULIC PUMP -5576 See: Tools and Equipment/999 5575 Puller Cylinder Used With Hydraulic
Pump -5576 used with: 999 5576 HYDRAULIC PUMP See: Tools and Equipment/999 5576 Hydraulic Pump (foot operated).
Alternatively: 999 2615 Hydraulic pump See: Tools and Equipment/999 2615 Hydraulic Pump , which consists of a puller cylinder and a compressed
air driven hydraulic pump.
Removal
Removing the connecting socket
Place drain pan underneath the transaxle.
Ensure that the piston rod in the puller cylinder is in the outer position. Position 999 5777 Extractor See: Tools and Equipment/999 5777 Extractor
between the puller cylinder and the transaxle. Press in the expander so that it enters the channel on the connecting socket.
Apply the puller cylinder. Check that the socket between the transaxle and the puller cylinder is in contact with its support surfaces.
Remove the socket.
