V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
Front Door Window Motor: Service and Repair
Electric motor, lift mechanism, front door
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the electric motor for the power window mechanism
Caution! The control module and the electric motor may not be parted.
Remove:
-
the door panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Panel Front Door
-
the 3 connectors
-
the 3 screws
-
the lift mechanism motor.
Installation
Note! For tightening torques, see Specifcations. See: Body and Frame/Specifications
Installing the electric motor for the power window
Install:
-
the lift mechanism motor
-
the 3 M6 screws. Tighten
-
the 3 connectors
-
the door panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Panel Front Door
Ordering software
Note! The control modules must be programmed after changing lift mechanism motor.
