V50 AWD L5-2.5L Turbo VIN 68 B5254T3 (2005)
Use a pen to mark the tape piece see illustration.
Note!
No less than 0.08 inch (2 mm) and no more than 0.12 (3 mm) between the markings. This facilitates adjustment of the side window pane.
16.
Adjusting the position of the side window pane in the sealing strip, continued
Undo the rear retaining screw (at the B-pillar) of the pane mounting two turns.
Lift the rear edge of the side window pane up to the upper marking on the tap (max. 0.12 inch/max 3 mm). Hold the side window pane in place and
tighten the rear screw to 6 lb ft (8 Nm).
Check the position of the pane in the sealing strip as described in steps 11, 12, 13 and 14.
The measurement at position 2 must be at least 0.06 inch (1.5 mm).
17.
Checking side window functionality
Close the side window.
Open the side window using the "Auto down" function. Close the side window using the "Auto up" function.
18.
Sealing below door mirror
