volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Reinforcement Strut for Tow Hitches|Page 22092 > < Reinforcement Strut for Tow Hitches|Page 22090
Page 8
background image

-

Pry off the four external clips at the front edge/bottom edge of the sill trim panel on the tailgate

-

Pry up one of the corners of the sill trim panel so that the two clips at that end release. Use a weatherstrip tool

-

Pull up the sill trim panel so the remaining six clips release. Remove the panel

-

Detach the rubber strip where it covers both the side panels in the boot opening.

-

Fold the seat cushion and backrest forward on both the right and left-hand sides of the rear seat.

-

Grasp the upper edge of the right-hand side cushion. Pull the side cushion forward so that the clip on the reverse releases

-

Slide the side cushion up. Remove the side cushion

-

Remove the screw at the rear edge of the panel at the front/top of the right-hand side panel

-

Pull the panel upwards so that the four clips on the inside release. Remove the panel

-

Repeat the operation for the left-hand side.

Reinforcement Strut for Tow Hitches|Page 22092 > < Reinforcement Strut for Tow Hitches|Page 22090