volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Floor Console Cup Holder|Page 23132 > < Floor Console Cup Holder|Page 23130
Page 3
background image

Lift the rear edge of the center console. Then lift the center console forwards / upwards.

Transferring components

Transferring components center console

Transfer:

-

the cup holder. See: Floor Console Cup holder See: Floor Console Cup Holder 

-

the rear cigarette lighter socket. See: Extra power socket 12V See: Power and Ground Distribution/Auxiliary Power Outlet/Service and
Repair/Removal and Replacement/Extra Power Socket 12V 

-

the cover / armrest. See: Cover/armrest tunnel compartment See: Arm Rest/Service and Repair/Cover/Armrest Tunnel Compartment 

-

the front storage compartment. See: Storage compartment front center console See: Storage Compartment Front Center Console.

Installation

Installing the center console

Align the center console.

Install:

-

the 2 connectors

-

the 4 screws. Tighten

-

the panel under the cover / armrest

-

the 2 connectors. See: Power socket 12V See: Power and Ground Distribution/Auxiliary Power Outlet/Service and Repair/Removal and
Replacement/Power Socket 12V 

-

the center console. See: Center console See: Center Console 

-

the panel inside the center console. It is secured with 4 hidden clips.

Guide the boot over the handbrake lever.
Angle in the frame of the boot.
Press the boot into position on the side.

Floor Console Cup Holder|Page 23132 > < Floor Console Cup Holder|Page 23130