V50 T5 L5-2.5L Turbo VIN 68 B5254T3 (2006)
-
Tighten the ground lead to the ground terminal.
-
Clamp the ground lead at the existing clamps and clamp the cable excess using a tie strap from the kit.
Illustrations A and B
-
Route the cable from the timer relay (1) along the cable to the passenger compartment connector socket, up on the top side of the engine
compartment's left-hand side and over to the right-hand side. Finish by pulling the cable down to the rubber grommet in the cowl panel.
-
Take six tie straps from the kit and clamp the cable at the existing cable.
