V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Unscrew the two external clips at the front edge/bottom edge of the sill trim panel on the tailgate.
-
Pry up one of the corners of the sill trim panel using a weatherstrip tool so that the two clips at that end release.
-
Pull up the sill trim panel at the other end so that the remaining two clips release. Remove the sill trim panel.
-
Remove the three clips that hold the right-hand side panel in the bodywork.
-
Unhook the side panel from the mounting on the underneath of the parcel shelf.
-
Unhook the side panel from the rear load securing eyelet. Lift out the side panel.
-
Remove the four screws for the bumper. The screws are underneath the bumper and on the sides at the bottom of the tailgate opening.
