volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Universal Bus Module (USB)|Page 15381 > < Universal Bus Module (USB)|Page 15379
Page 9
background image

Applies to cars with manual gearbox

-

Remove the gear selector lever boot from the center console. First pry it off at the front edge using a weatherstrip tool and then unhook it at the
rear edge.

-

Remove the two screws.

-

Remove the two screws holding the centre console's panel to the dashboard.

-

Remove the connector on the reverse of the dashboard environment panel.

-

Remove the panel from the dashboard and tunnel console.

Universal Bus Module (USB)|Page 15381 > < Universal Bus Module (USB)|Page 15379