volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Universal Bus Module (USB)|Page 15433 > < Universal Bus Module (USB)|Page 15431
Page 36
background image

-

Place the relay behind the existing cable harness.

-

Reinstall the connectors to the rear section of the glove box. Note the color marking on the cable for the right-hand connector.

Reinstall:

Dashboard

-

the lower vent.

-

the sound proofing.

-

the rear section of the glovebox by guiding it in diagonally inside the center console. Then straight forward. The rear section must be positioned on
the outside of the remaining inner section.

-

the clip for the vent on the glovebox.

-

the panel on the dashboard end face.

-

Remove the tape.

-

the panel above the centre console. Check that the cable to the control panel is not pinched.

Passenger compartment

-

the B-pillar panel.

-

the sill trim panels.

Universal Bus Module (USB)|Page 15433 > < Universal Bus Module (USB)|Page 15431