V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Remove:
-
the 3 M6 nuts
-
the control module.
Disconnect the connectors.
Note! If the vehicle is equipped with global positioning system module (GPS) (1), it must be transferred to the new audio module (AUD).
Installation
Note! For tightening torques, see Specifications. See: Specifications/Mechanical Specifications/Starting and Charging
Installing the audio module (AUD)
Note! Check that there is no dirt in the optical connectors.
The bend radius of the optic cables must not be less than 25 mm.
Install:
-
the connectors
-
the control module.
-
3 M6 nuts.
Install the cargo compartment side panel. See: Side panel loadspace See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Side
Panel Loadspace.
Finishing
Note! After replacing the audio module (AUD), new software must be ordered and programmed.
Ordering software
Order software. See: 30667195