V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Allow to dry.
-
Apply a thin and even coat of activator on the cleaned surfaces. Allow to dry for a minimum of 10 minutes and a maximum of 30 minutes before
painting.
-
Take four pieces of tape from the kit.
-
Remove the brown protective film from the tape. Apply the tape to the front of the holder.
Repeat on the three other holders.
-
Paint sensors and holders in the same color code as the car. Use Volvo recommended paint. Paint a maximum of two coats (one coat of base
colour and one coat clear lacquer). Protect the connections to prevent getting paint on the contact surfaces.
Caution! Too many layers of paint may result in partial or complete malfunction.
Preparations, passenger compartment
