V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Applies to 4-pin towbar wiring
-
Refit the ends of the cables in the connector in as follows:
-
Press the connector's catch into place and connect it to the trailer module (TRM).
Installation of the bumper cover
-
Lift up the bumper cover into position. Plug the sensors' connector into the connector secured below the right-hand tail lamp.
-
Reinstall the bumper cover by carrying out the removal instructions in reverse order for:
-
V50 in steps 9-12.
-
S40 in steps 29-32.
Installing, parking assistance module (PAM)
