V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Turn the ignition key to position 0.
Note! Wait at least three minutes before unplugging the connectors or removing other electrical equipment.
Preparations apply to the S40 (04-) and V50
-
Remove the four screws (1) for the bumper. The screws are underneath the bumper and on the sides at the bottom of the tailgate opening.
-
Remove the five screws (1) holding the bumper cover at the rear edge of the wing liner in the rear wheel arch. Repeat on the other side.
Illustration A
