V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Take the wiring harness and protective cover from the kit.
-
Attach the protective cover to the 4-pin connector.
-
Take the connector holder from the kit. Fit the connector in the connector holder and press both halves of the holder together.
Note! Make sure the protective cover retaining strap is not pinched but is positioned in the recess in the connector holder.
-
Install the assembled electrical connector from the kit for the four pin towbar wiring, on the bracket from the kit to the tow bar using the two
screws and nuts. The connector must be positioned so that the single pin in the connector is at the top.
