volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Towbar, Wiring, 4-pin|Page 17380 > < Towbar, Wiring, 4-pin|Page 17378
Page 10
background image

-

Remove the insulation panel on the right-hand side. It is secured with two clips.

Illustration A applies to cars without RTI (road traffic information)

-

Remove the screw and the nut holding the AM/FM tuner module (AFM) in the bodywork. Disconnect the wiring if necessary.

-

Place the AM/FM tuner module (AFM) to one side.

Illustration B applies to cars with RTI (road traffic information)

-

Remove the screws and the nuts holding the AM/FM tuner module (AFM) and the traffic message channel module (TMC) in the bodywork.

-

Remove the AM/FM tuner module (AFM) and the traffic message channel module (TMC) from the bodywork. Disconnect the wiring if necessary.

-

Place the AM/FM tuner module (AFM) and the traffic message channel module (TMC) to one side.

Installing the control module

Towbar, Wiring, 4-pin|Page 17380 > < Towbar, Wiring, 4-pin|Page 17378