V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Front Door Exterior Handle: Service and Repair
Handle outer door front
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Removing the battery lead (only vehicles with KVM)
Disconnect the battery negative lead. See: See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting
Removal
Removing the outside handle front side door
Remove the cover in the end of the door.
Slacken off the screw for the lock cylinder.
Note! Only slacken off the screw 4 turns. Otherwise the screw may fall down into the door.
Remove:
-
the lock cylinder
-
the rubber seal.
Work the handle loose from the door.
Only vehicles with KVM