V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Trunk / Liftgate Lock: Service and Repair
Trunk lid/tailgate lock mechanism
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the lock mechanism
Open the tailgate.
Remove:
-
the tailgate panel. See: Tailgate/trunk lid panel See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and
Repair/Tailgate/Trunk Lid Panel
-
the connector for the lock mechanism.
Hint: Press the connector using a screwdriver to disconnect it.
Remove the 3 screws.
Installation
Note! For tightening torques, see Specifications. See: Specifications
Installing lock mechanism
Install:
-
the lock mechanism
-
the 3 M8 screws. Tighten
-
the connector
-
the tailgate's panel, see: Tailgate/trunk lid panel See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and
Repair/Tailgate/Trunk Lid Panel.