V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Install the ISOFIX attachment to the SIPS tube with the four screws from the kit. Tighten the screws to 10 Nm (7.5 lbf.ft.)
-
Reset the backrest.
Integrated Booster Cushion Outer
Integrated booster cushion outer
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing booster cushions
Fold up the booster cushion.
Remove:
-
the 2 M6 screws at the rear edge
-
the 2 M6 screws at the front edge.