V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
If the heater pad is the type where the pad and/or cable is placed in the channel, the pad must follow the foam filling as illustrated. If not, the pad and/or
cable may be loaded and damage the pad. The type of seam on the upholstery may cause wear in the long term.
CAUTION: There must not be any bubbles or kinks when the heater pad is bonded to the foam filling. This increases the risk of damage to the
pad during use. This applies to the entire surface, but to the heating wires in particular.
