V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Strut Tower Brace: Service and Repair
Stabilizer bar, spring strut turret
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the stabilizer bar
Remove:
-
the 2 x nuts on both sides
-
the stabilizer bar.
Installation
Note! For tightening torques, see Specifications. See: Specifications/Mechanical Specifications/Steering
Installing the stabilizer bar
Install:
-
the stabilizer bar
-
the 2 x M8 nuts on both sides.