V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Brake Pedal Assy: Service and Repair
Brake Pedal, Replacing
Brake pedal, replacing
Note: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct.
Preparatory work
Remove the dashboard.
Removal
Removing the brake pedal
Remove:
-
the connector (1)
-
the connector (2).
Cut off the tie straps for the cable harness.
Remove:
-
the 5 nuts (3)
-
the 1 screw (4)
-
the brake pedal together with the accelerator pedal (AP).
Remove the pin for the power brake booster.
Note: The pin cannot be separated entirely. It must be replaced with a new pin on installation.
Removing the accelerator pedal (AP)
Remove: