V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Crankshaft: Service and Repair
Crank Mechanism, Dismantling
Crank mechanism, dismantling
Special tools:
999 5746 Holder See: Tools and Equipment/999 5746 Holder
999 5679 Oil filter spanner See: Tools and Equipment/999 5679 Oil Filter Spanner
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing oil sump
Remove the screws that hold the oil sump to the intermediate part.
Tap carefully on the side of the oil sump with a plastic mallet.
Lift away the oil sump.
Removing the oil pump's suction pipe
Remove:
-
the oil channels' O-rings
-
the screws that hold the suction pipe to the intermediate part.
-
the suction pipe by wiggling/lifting
-
the suction pipe's O-ring.
Check the pipe and the strainer netting.
Check
Checking markings
