V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Press the Velcro onto the receiver unit.
-
Remove the protective backing tape from the other Velcro piece.
-
Move the floor and insulating mat out of the way.
-
Scrape away any sealing compound from the flat surface at the bottom edge of the A-post where the receiver unit for remote start will sit. The top
edge of the receiver unit should be positioned 30 mm (1 3/16 ") from the bottom edge of the welded screw in the body.
-
Clean the surface using isopropanol P/N 1161721. Wipe dry.