V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Fit the front engine bracket
Raise the engine. Use: 999 7103 Lifting beam See: Tools and Equipment/999 7103 Lifting Beam and hook 999 5185 HOOK See: Tools and
Equipment/999 5185 Hook. Raise the engine to its original position.
Install:
-
the engine mounting on the cylinder head. Tighten. See Specifications. See: Specifications/Mechanical Specifications/Tightening Torque.
-
the limiter over the engine pad on the right-hand side. Tighten. See Specifications. See: Specifications/Mechanical Specifications/Steering.
Remove:
-
the special tool. Use: 999 7103 Lifting beam See: Tools and Equipment/999 7103 Lifting Beam
-
the expansion tank. Secure the hoses.
Finishing
Installing components
Install:
-
the pressure hose for the power steering pump. Remove the seals
-
the fender liner
-
the front wheel. See: Wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.
