V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Note! Install a new seal carefully using the removed evaporator as a template.
Install the heat exchanger.
Hint: To facilitate assembling the pipes, lubricate the ends with a little oil.
Note! Use new O-rings for the pipe ends.
Install the pipes at the connection to the heat exchanger pipes.
Note! Use the new clips when installing the pipes.
Install the clips so that they lock securely. A click must be heard.
Note! The clips only fit one way in the pipe connection.
Install:
-
the 8 x screws for the cover. Tighten
-
the air duct