volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Front Position Sensor, Headlamp|Page 21683 > < Changes Introduced Up to and Including April 2007|Page 21680
Page 1
background image

Headlamp Alignment Sensor: Service and Repair
Front Position Sensor, Headlamp

Front position sensor, headlamp

NOTE:  The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct.

Preparatory work

Ignition off

Ignition off.

Lifting points

This work requires that the vehicle be raised.

Turn the wheels fully to the right.

Remove the plastic nut securing the fender liner. Fold out the fender liner.

Removal

Removing the position sensor

Remove the position sensor from the bracket.

Remove:

-

the M6 screw (1)

-

the 2 screws (2)

-

the connector.

Installation

Installing the position sensor

Install:

Front Position Sensor, Headlamp|Page 21683 > < Changes Introduced Up to and Including April 2007|Page 21680