V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Remove:
-
the oil filter housing cover together with the filter insert
-
the filter insert from the housing
-
O-ring. Allow the filter insert to drain and then discard it in an approved place.
Installation
Installing the oil filter
Clean the housing. Install a new O-ring. Lubricate the O-ring. Install a new filter insert in the cover of the oil filter housing. Screw the filter housing and
filter into place. Tighten. See Specifications. See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening Torque
Installing components