V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Installing the pipe assembly
Note! For tightening torques, see Specifications. See: Specifications/Mechanical Specifications/Steering
Assemble the pipes at the steering gear end.
Install the pipe assembly in the steering gear.
Note! Use new O-rings.
Install:
-
the 1 screw. Finger-tighten
-
the pipes in the clamp on the steering gear.
Install:
-
the bracket
-
the 2 M10 screws.
