volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Camshaft Position Sensor > < Boost Solenoid, Turbocharger|Description and Operation
Page 1
background image

Boost Solenoid: Service and Repair

Turbocharger (TC) Control Valve, Replacing 

NOTE:  The illustrations in this service information are used for different model year and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct.

Removal 

Removing the turbocharger (TC) control valve 
Raise the vehicle.

Remove: 

-

lower the engine cover, if installed. Disconnect the connector for the turbocharger (TC) control valve

-

the screws for the turbocharger (TC) control valve

-

the hoses for the turbocharger (TC) control valve. Note the position of the hoses to facilitate installation.

Installation 

NOTE: For tightening torques, see Specifications.

Installing the turbocharger (TC) control valve 

Install: 

-

the hoses for the turbocharger (TC) control valve. See earlier markings

-

the screws for the turbocharger (TC) control valve. Tighten

-

the lower engine cover, if installed.

Camshaft Position Sensor > < Boost Solenoid, Turbocharger|Description and Operation