V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Install:
-
a new gasket held in position by the lower screws for the intake manifold
-
the intake manifold. Do not forget the crankcase ventilation hose. The hose must be inserted up through the gap between the second and third ducts
-
the three upper screws. Tighten all the screws starting from the center. Tighten. See: Tightening torque See: Engine, Cooling and
Exhaust/Engine/Specifications/Mechanical Specifications/Tightening Torque
-
the clamp for the fuel line on the intake manifold.
Installing components
Install:
-
the crankcase ventilation hoses on the intake manifold
-
the hose from the oil trap to the camshaft cover. Use a new hose clamp.
Installing the fuel rail