V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Order software for the differential electronic module (DEM) according to VIDA.
Programming the control module
Program the new differential electronic module (DEM) according to VIDA.
Automatic Transmission
Differential electronic module (DEM), replacing
Note: As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information is always correct.
Preparatory work
Ignition off.
Wait 3-4 minutes after the ignition has been switched off to reduce oil leaks on removal.
Removal
Removing the differential electronic module (DEM)
Note: Clean the area around the control module thoroughly before beginning removal. Position a container underneath the Active On Demand
Coupling. Disconnect the connectors for the control module and the oil pump.
Remove:
-
the 2 screws for the control module
-
the control module with the sealing plate and the cupped washer.
Removing components from the Active On Demand coupling
