V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Specifications/Tightening Torque
Replacing sealing rings
Remove the sealing rings from the transmission.
Note! Make sure that no debris enters the transmission.
Install new seals in the transmission. Use petroleum jelly to hold the seals in position.
Checking the gear selector slide
Check that the control rod for the gear selector slide is correctly positioned.
Installing the control system
Note! Make sure that the gear selector's lever is in N (neutral).
Align the control system on the lever for the gear selector.
Install:
-
the screws for the control system