V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Diagnostic trouble codes (DTCs) can only be erased once all the diagnostic trouble codes (DTCs) have been read off at least once.
Reading off the control module identification
VIDA identifies control modules by reading off a number of codes from the control module memory. The codes contain information about the control
module:
-
hardware P/N (control module without software)
-
hardware serial number (control module without software)
-
software P/N
-
diagnostic software P/N.
Reading off extended diagnostic trouble code (DTC) information
This function can be used to read parameters, status identifiers and counters stored at the same time as a diagnostic trouble code (DTC). These are called
frozen values.
Reading off the parameter values
Using this function, the status or value of parameters can be read off. The status/value is presented digitally.
Checking the Volvo On Call service
This test can be used to check the status of the reserve battery for Volvo On Call.
Resetting the reserve battery
This service is used when the reserve battery has been replaced to reset the value to 100%. The algorithm of the battery must be reset if the reserve
battery in a phone module (PHM) with Volvo On Call is replaced.
Resetting the carphone code
This function is used to reset the carphone code to the original code when it has been changed.
Vehicle Communication Information, Multimedia Module (MMM)
Description of read-out of extended diagnostic trouble code information
Contents
Select type of description:
-
Description of frozen values See: Scan Tool Testing and Procedures/Vehicle Communication Information, Multimedia Module
(MMM)/Description Of Frozen Values, MMM
-
Status identifier, description See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and
Procedures/Description Of Status Identifier
-
Counters, description See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and
Procedures/Description Of Counter
Vehicle Communication Information, Audio Module (AUD)
Description of reading off of extended diagnostic trouble code (DTC) information
Contents
Select type of description:
-
Description of frozen values See: Scan Tool Testing and Procedures/Vehicle Communication Information, Audio Module (AUD)/Description Of
Frozen Values, AUD
-
Status identifier, description See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and
Procedures/Description Of Status Identifier
-
Counters, description See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and
Procedures/Description Of Counter
Vehicle Communication Information, Integrated Audio Module (IAM)
Description of reading off of extended diagnostic trouble code (DTC) information
