V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Ignition off. Wait for 2 minutes
-
Remove the cover over the control module box. Put the cover to one side
Note! Do not touch the control module terminal pins with your fingers. Static electricity may damage components in the control module.
-
Insert tool 999 5722 Wrench See: Tools and Equipment/999 5722 Wrench around the control module.
-
Move the upper section of the tool backwards as far as it will go. Pull up the tool
-
Carefully pull up the control module.
Installing the engine control module (ECM)