V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Unscrew the two external clips at the front edge/bottom edge of the sill trim panel on the tailgate.
-
Use a weatherstrip tool and pry up one corner of the sill trim panel so that the two clips in that end release.
-
Pull up the sill trim panel at the other end so that the remaining two clips release. Remove the sill trim panel.
Illustration A
Illustration B
-
Remove the four clips (1), in illustration A, holding the side panel in the bodywork.
-
Unhook the front edge of the parcel shelf panel at the mounting (2), in illustration A. Pull the side panel away from the parcel shelf panel and the
panel on the C-post.
-
Unhook the side panel from the mounting (3), in illustration B, on the underneath of the parcel shelf.
-
Disconnect the connector for the 12V socket, if present.
-
Unhook the side panel from the anchorage eyelets (4), in illustration A. Remove the side panel.
Preparations, bumper cover
Applies to all models