V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
Pull the cable out through the rubber grommet
-
Take the connector from the kit.
-
Undo the catch.
-
Install the cable end pins in the connector.
1. Blue (Blue, BL)
2. Green (Green, GN)
3. Violet (Violet, VO)
4. Yellow (Yellow, Y)
5. White (White, W)
6. Black (Black, SB)
-
Press back the connector's catch.
-
Take the long cable from the kit. Connect to the connector that was made in order in the previous step.
-
Route the cable inside the floor mat and back further.
Applies to right-hand drive cars
-
Fold back the rear seat's backrest temporarily.
-
Pull the cable inside the floor carpets and the lower B post panel, over to the right-hand side.
