V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Note! It is important that the parking assistance module (PAM) is connected the same way as the first unit.
-
Detach the green male contact (1) which is taped at the rubber grommet and connect it to the Trailer Module (TRM) / Accessory Electronic
Module (AEM).
Note! Take care to connect the cable harness correctly, and not in a loop.
Applies to cars with the Keyless system
-
Plug the gray connector into the corresponding gray connector.
Note! Ensure that all the connectors click into place and are properly secured.
Finishing work
-
Gather together any excess cables. Clamp the cables securely where they cannot rub or become damaged.
-
Refit the panels and remaining parts removed in reverse order.
-
Download the software for the accessory's function following the service information in VIDA.
-
Check the function.