V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Remove:
-
the 2 screws
-
the control module / relay box. Fold down and pull towards you.
Note! Ensure that the control module / relay box is in the lower position when you remove it from the mounting.
-
the cable ties
-
the connectors.
Note! Note the location of the relays.
Remove relays and fuses from the control module / relay box.
Hint: For the location of the relays and fuses, see:
-
Wiring diagrams for relevant model year.
-
Decals at both the relay box and the fusebox in the car
-
Pocket Data Booklet
-
Owner's Manual.
Installation
Installing the central electronic module (CEM) / central relay module
Caution! The pins are fragile. Check that the connector goes straight down into the control module.
Install:
-
relays. Take care with the positioning
-
the connectors. Press down carefully
-
the control module / relay box
-
the 2 screws