V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
-
the control arm in the lateral link
-
the screw. Do not tighten yet.
Note: The rear suspension must be in the normal position when tightening all the joints in the rear suspension where rubber bushings are involved.
See: Normal position.
Tighten the screws. For tightening torques, See: Specifications
Installing the shock absorber
Install:
-
the shock absorber in the lateral link
-
the screw. Tighten. See: Specifications.
Installing the air baffle
Install:
-
the air baffle
-
the 2 x screws (1)
-
the plastic nut (2), x 1.
Note: The illustration displays the left-hand side. When replacing the lateral link on the right-hand side, the same procedure applies with the
right-hand air baffle.
Finishing