volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Changes Introduced Up to and Including April 2007|Page 6710 > < Changes Introduced Up to and Including April 2007|Page 6708
Page 2
background image

Remove the air cleaner (ACL) module. See: Air filter module See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air
Cleaner Housing/Service and Repair  Air filter module See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair.

Removing transmission control module (TCM)

Caution! Do not touch the control module terminal pins with your fingers. Static electricity (electric static discharge - ESD) may damage
components in the control module.

Remove:

-

the 2 connectors (1)

-

the M8 screw for the bracket (2)

-

the bracket

-

the 3 M8 screws (3)

-

the nut (4)

-

the lever

-

the control module. Do not damage the terminal pins.

Installation

Note! For tightening torques, see Specifications.  See: Specifications/Mechanical Specifications/Tightening Torque

Installing transmission control module (TCM)

Changes Introduced Up to and Including April 2007|Page 6710 > < Changes Introduced Up to and Including April 2007|Page 6708