V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
If the entire propeller shaft is to be removed, the rubber boot must be protected.
Cut a 35 mm (1 3/8") piece of discarded coolant hose or similar. Cut the hose to length. Insert the hose in the joint and secure it with a cable
Important! The propeller shaft must not be raised without protecting the rubber boot
If a part of the propeller shaft is to be loosened, use a jack to support the part until the propeller shaft is suspended. If the entire propeller shaft is to be
removed, both parts must be supported.