V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Remove the seal.
Check that no seal residue is left.
Lubricate the edges of the new seal using automatic transmission fluid.
Install:
-
999 5769 Pilot See: Tools and Equipment/999 5769 Pilot
-
the seal for the guide pin. Use: 999 5770 Drift See: Tools and Equipment/999 5770 Drift.
Tap in the seal until the drift is against the transmission.
Remove the locating pin.
Install the drive shaft. See: Axle Shaft Assembly/Service and Repair/Driveshaft Left.
Check the oil level. See: Transmission oil level - checking See: Automatic Transmission/Transaxle/Service and Repair/Procedures/Transmission Oil
Level - Checking.
Install the splashguard under the engine.
