V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Remove the 2 nuts for the gear selector cable lead-in from either side of the center console. Unhook the lead-in from the studs in the floor.
Remove the gear selector cables.
Installation
Note! Tightening torque. Refer to: Tightening torque See: Specifications/Mechanical Specifications
Note! When installing cables: Be careful to ensure that there are no sharp bends or kinks in the cable, especially between the inner cable and
outer sleeve.
Place the cables in position through the floor, up to the transmission.
