V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Check the mating surface for the connecting socket. The socket must be replaced if there are signs of grooves or corrosion.
Removing the sealing ring for the connecting socket
Remove the sealing ring from the transaxle.
Use: 999 5069 EXTRACTOR See: Tools and Equipment/999 5069 Extractor and 999 5656 Counterhold See: Tools and Equipment/999 5656
Counterhold.
Check that there are no seal remnants.
Removing the drive shaft sealing ring
Remove the sealing ring for the drive shaft and O-ring for the connector sleeve.
Use a screwdriver.
Check that there are no seal remnants.
Use: Glue, 1161370
Installation
Installing the O-ring and sealing ring
