V50 T5 AWD L5-2.5L Turbo VIN 67 B5254T7 (2008)
Install:
-
a new O-ring for the connector sleeve on the differential housing
-
a new sealing ring for the drive shaft.
Lubricate the seal using the wheel bearing grease, P/N 116 1241-3.
Use: 999 5654 Punch See: Tools and Equipment/999 5654 Punch.
Installing the sealing ring
Install the sealing ring for the connector seal.
Lubricate the seal using the wheel bearing grease, P/N 116 1241-3.
Use: 999 5657 Punch See: Tools and Equipment/999 5657 Punch.
Tap in the seal until the drift bottoms on its stop against the transaxle.
Installing the snap ring and connecting socket
Install:
-
the snap ring for the socket
-
the socket for the transaxle with the long splined section (2) toward the transaxle.
Use a rubber mallet to knock in the sleeve.
Finishing
