volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Bonded Window General, Information|Page 22884 > < Bonded Window General, Information|Page 22882
Page 1
background image

Windshield: Service and Repair
Windshield

Windshield

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Note! The method refers to two different Volvo adhesive kits.The products in the kits must not be confused.For further information, see the
Volvo Chemical Catalog.

Use special tool 951 2925 and 998 6030.

Removal

Preparatory work

Put the adhesive in the oven (applies when using adhesive kit 1161820).
Remove the cowl. See  Plenum chamber See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair.
Turn the door mirror mount to disconnect the door mirror.
Remove the rain sensor. See: Rain sensor See: Sensors and Switches/Sensors and Switches - Wiper and Washer Systems/Rain Sensor/Service and Repair
.

Remove the guide strip at the bottom edge.

Bonded Window General, Information|Page 22884 > < Bonded Window General, Information|Page 22882