V50 T5 FWD L5-2.5L Turbo VIN 67 B5254T7 (2010)
Cowl Moulding / Trim: Service and Repair
Plenum chamber
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the plenum chamber
Remove:
-
the windshield wipers. See Wiper arm
-
the 4 clips
Press the center pin down onto the clips.
Turn the 2 catches (1) anti-clockwise ¼ turn.
Lift out the cowl.
Removing the splash guard
Note! Removing protective covers applies to vehicles with the following chassis numbers:
-
S40 LHD -113670
-
S40 RHD -113793
-
V50 LHD.-113964
-
V50 RHD.-114112.
Remove the old protective cover from under the cowl using a screwdriver or similar.