V70 L5-2.4L VIN 55 B5254S (1998)
Installing rubber boot, lock clip
Lubricate rubber boot sealing surfaces (2) with petroleum jelly.
Reinstall the rubber boot. Ensure correct position in relation to body panels. (see illustration)
Ensure that inner rubber (1) seal is correctly seated and that the drain pipe (3) is positioned as per illustration.
Install lock clip (4).
Refill the tank.
Install filler cap.
Start engine to ensure operation and check for DTC's.
Verify there are no leaks
26
Installing removed parts
Install cover over fuel pump unit.