V70 L5-2.4L VIN 55 B5254S (1998)
-
cover over fuel rail.
-
injector connectors.
-
2 fuel lines clamps to prevent pipes bending, see Illustration.
Note!
Carefully remove both retaining clamps for the fuel pipes to prevent fuel spillage when the fuel rail is removed.
Remove:
-
the return pipe at the pressure regulator.
-
pressure regulator vacuum hose.
(The above two points apply only to cars with return fuel system)
-
fuel rail mounting screws.
Carefully work off fuel rail.
Disconnect the fuel rail from the fuel line by twisting it through 90° and carefully pulling it away from the fuel line. Place paper under the connection to
absorb any fuel leakage.
Remove:
-
delivery line from the delivery line under the car at the sub-frame. The delivery line is marked with yellow tape.
Installing delivery lines
Install a new O-ring on the delivery line.
Carefully press in pipe and nipple into fuel rail.
Note!
Lubricate nipple 0-ring with petroleum jelly.